Today's Scripture: "The length of each curtain shall be twenty-eight cubits, and the width of each curtain four cubits. And every one of the curtains shall have the same measurements." Ex 26:2
5678. A perfect design requires perfect compliance with no variance. JG
Slope n square
In October of 2006, after 23 years of inactivity in the metal fabrication field, I found myself right back in the mix. I wish I could say all my energy came back for the reunion, but some things are renewable and some things are gone with the wind and time.
In the "old" days I managed the shop by sales and engineering, but in my most recent venture have actually done the work I'd previously expected someone else to do. Of course, without an overhead crane I had to manufacture steel products on wooden topped tables on metal horses. I have to tell you, my greatest challenge was to overcome heat-bent elements getting out of square. What I see in today's Scripture is the likelihood the builders of the tabernacle used the same methods as me to certify the length of same-length parallel things. Measure the slope from the ends of each side to tell if the object is square. One might say "X" marks the spot (three-dimensional center).
Keep me between the lines of Your word, Father, so I can deal with those living outside them.
1. One-minute Devotionals began on January 2, 2006 and are the original creation of James R. Green, Prayertower Webservant Content is derived from his alternating and sequential survey of both the Old and New Testament to offer insight
2. Resources are derived from daily devotions of James R. Green called, Just Thinkin'... (2000-2003), Read the Bible Thru in 365 Days (2004), Pray Thru the Word in 365 Days (2005) and One Minute Devotional (2006-2017)
3. Scripture taken from the New King James Version. Copyright (c)1982 by Thomas Nelson, Inc. Used by Permission. All Rights Reserved.
4. Jimisms and corresponding social media pins are an original work of James R. Green and are marked with a "JG" implying personal ownership. Used by Permission. All Rights Reserved.
Content provided by James R. Green & serviced by jgpro.net
Copyright 1999-2017 - All Rights Reserved